Power supply for the scanning units

Types Z412, Z4124

The listed energy sources are used to power the scanning units of the system BIS®. They can be used in a number of applications that require a constant supply of electricity.

The back-up energy source type Z412 requires voltage 230V~/50Hz, the output voltage is 15.2V/5A, The output voltage is backed up by a 12V/7Ah storage battery, which is constantly recharged when the device is in operation. The battery storage is prevented from being completely discharged by a protective circuit that cuts the power off when the battery is below 10.7V. The sources are (momentarily) protected by an electrical fuse from a short circuit.

Should there be a need to extend the back-up time, we provide energy source Z4124, whose output voltage is backed up by four storage batteries 12V/7AH that are constantly recharged.

Energy source Z412:

Technical parameters of the power source Z412

Properties Technical value
Power supply voltage: 230V~/50 Hz
Power consuption Up 75VA
IP Protection class: IP 56
Output voltage: 15,2V/5A ( power supply voltage 230V~/50Hz)
Backup: 12V/7Ah (not included as standard)
Time backup (per a battery) for 3 pcs of scanning unit - circa 1h 45min
for 2 pcs of scanning unit – circa 3h
Overvoltage protection: 17,25 – 20,25V
Overcurrent protection: >110%
Dimensions: 240 x 160 x 90 mm
Operating temperature: -25°C - +55°C

Back-up energy sources Z4124 with 4 batteries

Technical parameters of the power source Z4124

Properties Technical value
Power supply voltage: 230V~/50 Hz
Power consuption Up 75VA
IP Protection class: IP 56
Output voltage: 15,2V/5A ( power supply voltage 230V~/50Hz)
Backup: 12V/7Ah, 4 pcs (not included as standard)
Overvoltage protection: 17,25 – 20,25V
Overcurrent protection: >110%
Dimensions: 395 x 315 x 130 mm
Operating temperature: -25°C - +55°C

Power supply TL-POE200

Device TL-POE200B is used to power attendance scanning units HT200x and EP400x via Ethernet within 100 metres. Data and powering are divided into two cables. The output voltage can be regulated to 12.9 and 5V. This kind of powering is suitable only for units equipped with an internal MTCP converter.

Technical parameters:

Properties Properties
Standards and Protocols: IEEE 802.3, 802.3u
CSMA / CD, TCP / IP
Ports TL-POE200B: 1x 10/100M RJ45 LAN
1x 10/100M RJ45 PoE
Power supply: Input: 48 V, 0,5 A PSU
Output: 12/9/5 VDC
Environment: Operating temperature:0 °C ~ 40 °C
Operating humidity: 10% ~ 90%, non condensing
Others: LED power indicator
Dimensions: 81 x 52 x 24 mm

Power pack Z12

Selected types of scanning units can be powered by an energy source that is not backed-up (a power pack). This solution is suitable in particular for autonomous scanning units SU104xB104x.

Technical parameters:

Properties Properties
Power supply voltage: 230V~/50 Hz
Power consuption: 6 VA (at maximum load)
IP Protection class: IP 65
Output voltage: 12V=/500mA

Download

Contacts
ESKON s.r.o.
Address:
Vrchní 1568/37
747 05 Opava
GPS:
N49°56.81082'
E17°54.65300'
Tel.:
+420 553 624 055
+420 553 786 811
ID data box:
cvcdxzm

Write to us