SU104* - represent and new attractive design and technology line of hardware used to operate access rights to designated areas without keeping records. Variety of shades allow you to choose the right colour to complement the interior or other BIS applications.
SU104* - the scanners can be connected to Electronic Security Systems exchanges or the identification number can be transferred to a computer. They can also be connected to single-chip processors.
SU104* - the customer can choose between backup power supply or a power pack. It is possible to set the time span to unlock doors. A simplified signalling is provided by one LED diode.
SU104* - advantage is the possibility of installing yourself.
Variants of autonomous scanning units SU104*:
Is designed to manipulate electric door locks by means of contactless cards. Access to rooms is allowed only owners of cards that were programmed with a special Master card.
Is designed to manipulate electric door locks by means of contactless cards. Access to room is allowed only owners of cards that were programmed simply by notebook.
Is designed to transfer numbers of contactless cards to a device with the interface WIEGAND. It can be connected to exchanges of Electronic Security Systems or Fire Protection Systems and other peripheral hardware.
The unit can be used to transfer identification numbers from identification items to serial port of a computer (RS232) or for direct connection to single-chip processors.
Is designed to transfer identification numbers into device with the interface RS485.
Is designed to manipulate electric door locks by means of contactless cards. Access to room is allowed only owners of cards that were programmed simply by notebook. Its advantage is optional remote programming and listing of data when connected to a computer.
The scanning unit SU1046+ is suitable to authorize access to designated areas, including time limit on entry (i.e. time zone). It also can be used to simple attendance records without the need to enter reasons for interrupting work. It is connected for communication via RS485 or is equipped with an integrated TCP / IP converter.
Technical parameters of scanning units SU104*:
|Power supply voltage:||10-14V= /up 200mA|
|IP Protection class:||IP 40|
|Dimensions:||114 x 79 x 38mm|
|Operating temperature:||-25°C - +50°C|
|Identification:||UNIQUE, MIFARE, DESFIRE, HITAG 1,2|
|Range:||2-10cm according to the applied technology (possibility of an external antenna – up to 1,5m)|
|Contact relay:||1x N.O./N.C. Switch 1A/30VDC ~0,5A/125VAC|
|Frequency:||125kHz, 13,56MHz according to the technology|
|Number of authorized cards:||400 (possibility of increasing)|
Is designed to taking the fingerprints of. The sensor communicates with the PC via RS232 interface. It is equipped with a touch sensor module allows high-speed reading algorithm.
Technical paramaters of scanning unit SU1047bio:
|Power supply voltage:||10-14V= /up 250mA|
|IP Protection class:||IP 40|
|Dimensions:||110 x 110 x 38mm|
|Operating temperature:||0°C - +50°C|
|Capacity of fingerprints:||1900 in 1 MB flash , 9500 in 4 MB flash|
|Time of fingerprint verification:||<1s (verification mode) and <1s (identification mode)|
|Errors in loading fingerprints:||<0.1%|